Carpentry

From YPPedia
(Redirected from Carping)
A typical carpentry board

The carpentry puzzle is a duty puzzle, played at a ship's duty station. Players' performance at the puzzle can repair a ship's normal wear and tear, as well as damage obtained in sea battles. Carpentry also prevents bilge from rushing more rapidly into the ship.


Basic gameplay

The goal of carpentry is to fill holes quickly and efficiently with five-block pieces, much in the same way pentominoes is played. Pirates start with a hole, and three pieces to choose from. As a pirate's standing improves, the game adds up to 4 different, randomly shaped holes to work on simultaneously. Working too slowly will reduce the current score. If any given hole is neglected for too long, a piece will begin to shake rapidly, chunks will fall out and a reduction will be made to the final score. A finished hole is scored based on how many extra pieces were used. There are also bonuses for grain alignment and using only one type of piece in a hole. A pirate's standing may increase or decrease after a puzzle session depending on the score.

Controls

With a mouse:

  • Left-click: Select/release a piece. The piece can move while it is selected.
  • Mousewheel (scroll or click): Rotate the piece currently selected: scrolling down rotates clockwise, scrolling up rotates counterclockwise, clicking rotates the piece 90 degrees clockwise for each click
  • Right-click: Horizontally flip the selected piece
  • For the putty bucket, clicking on the hole (or pushing space above that hole) will fill the hole, up to 5 squares.

On the keyboard:

  • X and C: rotate the piece counter-clockwise and clockwise respectively
  • Z: Horizontally flip the selected piece
  • 1 - 3: Select the corresponding piece from the toolbox
  • Space: Selects/releases piece
  • Q, W, A and S: Center the selected piece over the top-left, top-right, bottom-left and bottom-right holes (respectively)
  • Arrow Keys: Move the selected piece
  • For the putty bucket, clicking on the hole (or pushing space above that hole) will fill the hole, up to 5 squares.

Scoring

  • A Masterpiece! - No extra pieces used.
  • Craftsmanship! - One extra piece used.
  • A Fair Job. - Two extra pieces used.
  • Sloppy Work. - Three extra pieces used.
  • A Pig's Breakfast! - Four or more extra pieces used.

Scoring also incorporates a few additional bonuses which help to increase scores.

Sequential masterpieces

A Masterpeice being scored

Masterpieces can be completed consecutively (Masterpiece2! Masterpiece3!...) for a bigger bonus. Anything less than a masterpiece will reset the counter. The masterpiece counter always resets when the star meter is filled and a new round begins.

This is the biggest bonus. The key to incredible carpenting is long strings of masterpieces, even without any of the other bonuses.

Grain bonus

Filling a hole with pieces, which all have their grain aligned horizontally, will grant a grain bonus to that pirate. Holes filled with the grain of all pieces aligned vertically will not score a grain bonus. Piece efficiency (I.E. filling the holes with as little overlap as possible) appears more important to the score, so it is not worth breaking a masterpiece in order to get a grain bonus. However, if the grain bonus can be made without affecting piece efficiency, the grain bonus will boost the score. When pieces first appear in the toolbox, their grain always runs horizontally.

All of the pieces that are four or more squares long (Y,L,N,I) only come with the grain running in one direction: along the length of the piece. Thus, in order to maintain a grain bonus, pirates should avoid creating holes that need a long piece to be placed vertically.

Though the putty bucket shows no grain, it will always preserve a grain bonus, even when filling a hole that, if filled with a "wood" piece of the same shape would lose its grain bonus. (e.g. Filling a vertical I-shaped hole with a putty bucket can maintain a grain bonus.)

Three pieces (V, W, and X) can always be placed with a horizontal grain. Through a combination of rotation and flipping, it is possible to keep the grain horizontal when a simple rotation would lose the grain bonus. Instead of rotating a W or V 90 degrees clockwise, and thus losing a grain bonus, just flip the piece. Instead of a 90 degree counterclockwise rotation, rotate 180 degrees then flip the piece over. These manipulations will put the piece in the same orientation as a 90 degree rotation, but with a horizontal grain. These manipulations are illustrated below.

Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock-C.png Cblock-C.png Cblock-X.png
Cblock-X.png Cblock-C.png Cblock-C.png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-C.png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-D.png Cblock-D.png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock-D.png Cblock-D.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock-D.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-C.png Cblock-C.png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock-C.png Cblock-C.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock-C.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock-C.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock-C.png Cblock-C.png Cblock-X.png
Cblock-X.png Cblock-C.png Cblock-C.png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-D.png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-D.png Cblock-D.png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock-D.png Cblock-D.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-C.png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-C.png Cblock-C.png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock-C.png Cblock-C.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Starting orientation Rotate 90 degrees clockwise Flip Rotate 180 degrees Rotate 90 degrees counterclockwise Rotate 180 degrees and flip

When the hole is still fairly large, it is often easy to place the pieces with the grain in the same direction. Eventually a player is likely to have to make a choice: they can either complete the hole with the grain bonus and a Craftsmanship, or they can complete it without the grain bonus, but with a Masterpiece. A Masterpiece without the grain bonus is worth more to a player's score than a Craftsmanship with it.[1] However, if the Masterpiece is unlikely, it may be better to take a relatively certain Craftsmanship with the grain bonus. For example:

Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-A.png Cblock-D.png Cblock-A.png Cblock-A.png Cblock-X.png
Cblock-X.png Cblock-D.png Cblock-D.png Cblock-D.png Cblock-A.png Cblock-X.png
Cblock-X.png Cblock-A.png Cblock- .png Cblock-D.png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-A.png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-A.png Cblock-C.png Cblock-A.png Cblock-A.png Cblock-X.png
Cblock-X.png Cblock-C.png Cblock-C.png Cblock- .png Cblock-A.png Cblock-X.png
Cblock-X.png Cblock-A.png Cblock-C.png Cblock-C.png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-A.png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
with F,L,L are available, The grain on the F would not allow the grain bonus if it were used as on the left. The other choice means that the player forfeits any chance of getting a Masterpiece, but allows them to get a Craftsmanship with a grain bonus, such as on the right.

Keeping the grain bonus places more constraints on where pieces can be placed, so a player will probably have to choose to forgo a grain bonus before they have gotten the hole down to a 2 piece space. Therefore it is generally best for scoring purposes to choose to lose the grain bonus before choosing to lose the Masterpiece.

Nice set

If a hole is filled with pieces of the same type, a player gets a Nice Set bonus. It appears to be about as good as a Grain bonus. This is generally easiest in holes which are 4x5, filled with Ps or Ls, and is rarely possible on much larger holes. Piece frequency (see below) makes reliable, regular use of the Nice Set bonus impractical, and the value of the bonus is not worth the effort of keeping a particular hole reserved for one specific shape.

Token carpentry

Token carpentry is a variation of carpentry, played by puzzlers during a blockade, flotilla or sea monster hunt. Some carpentry pieces will have one to three already connected bonus shape quarters added to the piece. The bonus pieces move with the carpentry piece, and are obscured by other carpentry pieces, with or without bonus pieces placed overlapping them. If, when a carpentry hole is completed, bonus pieces in that hole form a complete a circle, diamond, plus, or ex together, the puzzler contributes to filling the meter for the corresponding maneuver. If there are multiple complete bonus shapes in a single hole one of them is chosen at random to contribute towards the ship's tokens. When token carpenting on a sloop, two bonus pieces are required to fill the meter.

The quality of the fill also affects the bonus. If the hole does not earn at least a Fair Job rating, no bonus piece is awarded; a shape completed in a Masterpiece counts double.

Bonus shapes

Carpentry bonus shapes.png

Tips and tricks

Opinion.gif
Not everyone puzzles the same way.
Developing a unique approach to a puzzle or challenge that works for the individual is the most important aspect of mastering the craft.
These pictures and/or suggestions derive from personal opinions and are meant as guidelines only.
They are in no way hard and fast rules as to the "correct" way to do this puzzle or game action.
Carpentry Shapes and Frequencies
P - 22 F - 14 Y - 14 asym
Carp p.png
Carp f.png
Carp y.png
T - 7 W - 4 sym N - 8 asym
Carp t.png
Carp w.png
Carp n.png
U - 4 V - 4 sym L - 8 asym
Carp u.png
Carp v.png
Carp l.png
Z - 4 X - 3 sym I - 2 asym
Carp z.png
Carp x.png
Carp i.png
Asymmetric pieces only come with one grain direction.
Symmetric pieces have both grains in one.
Others have 2 kinds of grain direction.
Bucket - 1

Putty bucket.pngPutty bucket blue.pngPutty bucket red.png

A selected putty bucket will be outlined in blue if a space is fillable and red if a space cannot be filled by the bucket.

Fill holes from the outside in.

Avoid splitting a hole into two holes. Exceptions: If you have a putty bucket, a hole requiring multiple specific pieces, and no other holes close to completion, you may wish to cut off a one-piece section, knowing you can use the bucket to extend the lifetime of that hole.

If you have a hole requiring two specific pieces to fill, and one of them comes, wait to play it until the other piece you need appears. If you only have one piece to complete a masterpiece, fill it to open up your possibilities for other holes. If you are waiting to patch a craftsmanship, try to use a rare, difficult to place piece if you have one so you don't mess up future holes with it.

Try to work multiple holes at once, rather than one. Try to complete holes that are adjacent, not two that are diagonally apart, so new holes scroll in after each pair you complete. This way you will have plenty of space in two new holes in which you can play while waiting for pieces to complete two nearly finished holes. The board will then scroll across and you can begin the process anew.

You can adjust a piece once you've set it down. As long as you haven't picked up another piece, you can click again on your last piece and rotate or flip it, or move it up to one square in any direction. Once you hit a league point, you will no longer be able to adjust a placed piece.

Use difficult pieces (X, I, Z) as soon as possible to avoid having a box full of tough pieces. Usually you will want to place these in a big empty hole will give you more time and space to fill in a masterpiece around these troublesome pieces.

Try to fit all the pieces so that (ideally) the top 3 most common pieces, or whatever you already have in your bucket, will finish the masterpiece. Leaving your empty hole as square as possible makes this easier.

Remember that all holes can theoretically be completed with a masterpiece, so don't let holes expand by a square. (This happens when you neglect a new hole for too long -- when you ignore the warning for three turns). If the hole expands, you cannot get a masterpiece for that hole.

Example: Two-piece holes

When you have a hole down to the point where it will take 2 pieces to complete, wait until both of those pieces are available before you complete it. A bucket of putty makes it much easier, since then you only have to wait for one piece. Be aware that some shapes can be filled with many different combinations of pieces - do your best to finish on shapes like that. Here are some good shapes to finish on:

Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
The space to the left can be filled by: PL, PY, PT, PV, PZ, YU, or FU. This is the best shape to finish on. Notice that 5 of the combos take a P, which means you can get a P in your tool box, and then wait for one of 5 different shapes (with a total likelihood of 37 (out of 95)) to show up. Or if you already have one of those 5 shapes in your box, you just need to wait for a P – which is even better!
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
This can be filled by: PP, PU, PL, LN, or VZ. This is a good hole to leave, even though two of the combinations (PU and VZ) rely on rare pieces to complete. Beware of choosing to fill this hole with two P's. If you're already dependent on getting these in some of your other holes then this can be a dangerous trap.
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock- .png Cblock- .png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
This can be filled by: PP, PL, or PW. Not as many combos, but again is a matter of getting a P and then waiting for pieces with a total likelihood of 34 to show up. It's not a bad hole to leave, but the one below is better.
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Can be filled by: PF, PN, PV, or UX. This hole is better than you may think, because it can be filled with the two most common pieces (PF), but also leaves other options.
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Can be filled by: PP, NN, WW, or UU. Not great, but 2 Ps is pretty good.
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock- .png Cblock- .png Cblock- .png Cblock-X.png
Cblock-X.png Cblock- .png Cblock-X.png Cblock- .png Cblock-X.png Cblock-X.png
Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png Cblock-X.png
Can be filled by: PP, FV, or LU. Usually you'll end up needing 2 Ps, but consider leaving this hole if you already have a U or a V in your box.

Ultimate list

Cerulean Emerald Ice
Jade Meridian Obsidian
Opal


Trophies

Spoiler warning: Details about trophies are hidden below.

The following trophies are related to carpentry:


External/other links

Icon duty puzzles.png Duty Puzzles
Icon bilge.pngBilging | Icon carpentry.pngCarpentry | Icon navigation.pngDuty Navigation | Icon gunnery.pngGunnery |
Icon patching.pngPatching | Icon rigging.pngRigging | Icon sailing.pngSailing | Icon treasurehaul.pngTreasure Haul
See also: Sea Battle