Rigging

	The subject of this article is undergoing testing and may be changed before implementation.
	Please see discussion on the talk page or check out the testing on the Ice Ocean.

A typical rigging board

The rigging puzzle is a duty puzzle. Players' performance at the puzzle will accelerate or decelerate a vessel. It is an alternative to the sailing puzzle, and is started from the same place on a vessel. The "sailing" stations on a vessel are taken up when a player either starts sailing or rigging.

Basic Gameplay

The board is a hexagonal grid of pieces, which can be moved in straight lines in one of six directions. The board consists of 6 pulleys, one of which will always be active. The objective of the puzzle is to create large chains of pieces in front of an active pulley so they get pulled off the board. The active pulley changes after each move, regardless of whether a chain was made.

Controls

Mouse or W,E,A,D,Z,X keys: Move the cursor
Left click, S or spacebar: Select pieces
Right click or spacebar: Deselect and reset row of pieces

Scoring

Scoring is primarily based around creating large pulls, while avoiding lots of small pulls. Efficient clearing of pieces will produce the best scores. Clearing pieces faster does not affect scoring, but taking a long time between moves will decrease your score. It is thought that not pulling a chain 3 times in a row does not penalise your score - but you do lose 5 loops from your rope coil.

Pieces

There are 8 normal pieces in rigging, two of which appear after the puzzle has been played for a while.

The rigging pieces

Rope Coil

The rope coil with 8 loops

As pieces are cleared from the board, loops are added to the rope coil at the bottom of the board. When the coil is full (20 loops), a wild piece is added to the board and a new coil is started. The wild piece counts as any color in a chain. If no chain is made 3 moves in a row, 5 loops are lost from the rope coil.

Special Pieces

There are several special pieces in rigging which are obtained in different ways. These pieces will not be pulled by a rig if placed directly in front of it.

	Wild - The wild piece counts as any colored piece on the board. It is obtained by completing a rope coil with 20 loops.
	Hook - The hook piece will pull all surrounding pieces when included in a chain, regardless of their color. It is obtained by surrounding a non-matching piece in a pull.
	Tar - When pulled from the board, the tar piece causes the replacement pieces in that area to be the same color. It is obtained by removing all of one color from the board in a pull of 5 pieces or more.
	Splice - The splice piece causes a second adjacent chain to be pulled. It is obtained by linking an inactive pulley to a chain when it is pulled. The inactive pulley cannot be the ones either side of the active pulley.